Fixing Your Broken Grand Junction Furnace System

It’s winter time and for many of us, that means cold weather. And when the temperatures outside start to plummet, we rely on our furnaces to keep our homes warm and comfortable. But what do you do when your furnace breaks down?

Here are a few tips on how to troubleshoot a broken furnace:

  1. Check the thermostat: Ensure the thermostat is set to “heat” and not “cool.” Sometimes people accidentally set their thermostats to the wrong setting, which can cause the furnace to shut down.
  2. Check the pilot light: If your furnace has a pilot light, make sure that it is lit. If the pilot light is out, you may need to relight it.
  3. Check the furnace filter: A dirty furnace filter can cause the furnace to overheat and shut down. Try replacing the filter with a new one and see if that fixes the problem.
  4. Call a professional: If you’ve tried all of the above and your furnace still not working, it’s time to call a furnace repair professional. A qualified HVAC technician will be able to diagnose the problem and get your furnace up and running again in no time.

Keep these tips in mind the next time your furnace breaks down. And if you need help from a professional, don’t hesitate to give us a call. We’re always happy to help!

How To Check Your Furnace Correctly

The first step in troubleshooting your furnace is to inspect it for any visible damage. If you see any cracks or holes in the unit, it’s likely that air is escaping and causing the furnace to work harder than it needs to. This can lead to increased energy bills and reduced efficiency.

Inspect the Burners

If the furnace burners are dirty, they won’t be able to produce enough heat to properly warm your home. As a result, your furnace will have to work harder and use more energy than necessary. To clean the burners, shut off the power to the furnace and remove the burner covers. Use a brush or vacuum attachment to remove any dirt or debris from the burners.

Check the Air Filter

A dirty air filter can restrict the flow of air to the furnace, causing it to work harder than necessary. Check the filter, and remove it from the furnace. If you can’t see through the filter, it’s time to replace it.

Inspect the Blower Belt

If the blower belt is worn or damaged, it can cause the furnace to overheat and shut down. To inspect the blower belt, shut off the power to the furnace and remove the access panel. Locate the blower motor and look for a belt that’s wrapped around the Pulley. If the belt is damaged, you’ll need to replace it.

These are just a few of the things you can do to troubleshoot your furnace. If you’re still having problems with your furnace, it’s best to call a professional for help.

The Benefits of Getting a Furnace Technician

Your furnace is one of the most important pieces of equipment in your home, and it’s important to keep it running smoothly. While you may be tempted to repair your furnace yourself, it’s generally better to hire a professional. Here are a few reasons why:

  1. Safety first. Furnaces use natural gas or propane to heat your home, and these are both highly combustible materials. If you don’t have experience working with them, it’s easy to make a mistake that could lead to a fire or explosion. Leave the repairs to the professionals who know how to handle these materials safely.
  2. It’s usually more cost-effective. Sure, you might be able to save a few dollars by repairing your furnace yourself. But if you make a mistake, you could end up spending a lot more money to fix the problem. It’s usually better to just hire a professional from the start.
  3. You’ll get the job done right. Furnaces are complex pieces of equipment, and it takes a lot of training and experience to know how to repair them properly. If you try to do it yourself, there’s a good chance you won’t be able to fix the problem. And even if you do manage to make the repairs, they probably won’t last as long as they would if a professional had done them.

So, next time your furnace needs repairs, save yourself the hassle and call a professional. It’s the best way to ensure the job is done right and that your furnace stays in good working order.